February 1, 2010 at 6:32 am
Laser engraving is actually a simple process. The laser is just a tool. Laser can affect most materials today. The most common materials in the field of engraving are coated with metal, wood, acrylic, glass, leather, marble, plastics, and describes a variety of synthetic materials especially for laser, although it is sometimes difficult, as laser engraving laser marking. Unlike conventional etching, laser engraving simply notMasks or chemicals.
E 'was discovered in the early 1960s, when researchers discovered they could create a light source, focusing on energy and have a powerful enough to affect some materials. Laser marking is the preferred method when aesthetics or require permanent identification . It was not long for the engraving industry to notice lasers and soon lasers were used for a wide range of industrial applications including welding, heat treatment, etching andEngraving.
If you are thinking of a laser as a light source like a light bulb, you know that a bulb emits energy around him. And the concept of laser engraving is basically just another name for laser engraving.
The ability to laser cut complex profiles can eliminate the need for further action, so that the laser cutting highly economical. Laser cutting offers a superior quality board with parallel sides and withoutBoard. Laser cutting adds high precision, reduced contamination or deformation, and finishes of good quality for industrial applications trim.
Laser metal cutting option may be to some of the laser cutting systems are added. A laser works well for cutting acrylic (Plexiglas), PETG, thin polycarbonates (Mylar), styrene expanded PVC (Sintra), wood, paper and fabric.
You can mark the rows laser about 1 to 10,000. Co2Laser can give good results for marking glass and a significant reduction in operating costs and delivery costs. Laser marking is preferable if the role to be marked is too small or too complex, is a form of something, but characterize the etching laser.
Typical industries that laser marking is advertising, engineering and pharmaceutical industries. To control the laser marking is a process in which the materialindelible and very high speeds (milliseconds per character.) glass laser marking with CO2 laser "on the fly or on the move, while it may be a good companion now for many industrial environments and applications for glass marking.
They also actually some of the kiosks in shopping malls and retail specialty media for laser engraving services, as can be seen as the most common form of engraving. Many companies today are laser engraving machines, laser –Marking systems and laser etching equipment.
Laser engraving can be currently carried out by conventional industrial engravers for most jobs. Of the many products that are laser-etched in the day, iPods and laptops are among the highest in the consumer market. And laser engraving of metal used to power especially if the metal of the Arts harder
December 27, 2009 at 1:40 am
Marking of glass for industrial use has been for hundreds of years. In the past, the stamp ink marking methods, blasting, air-K, etching, engraving, etc. contained
Industrial uses of glass-marking is:
1. Identification of safety information for security in the world of business and residential users customers. These glass panels around doors and / or points of entry and exit.
2. Marking of glass for commercial and residentialConstruction shows that the glass door or producer [for the identification and marketing / sales activities]
3. Identification of a headlamp or tail light lens in automotive applications, manufacturers name, year of manufacture and / or part number. Even in the production of television sets used for the labeling of mirrors and lenses.
4. The identification of the serial number, product ID or other production information for the prevention of theft and validation of warranty claims
5. LabelingThe serial numbers, part numbers, text or barcodes allow parts of production can be traced to the final assembly and packaging
Even the traditional methods of glass-marking all contact with the surface of glass product, a product of stress and potential damage is not. CO2 laser offers significant advantages for the marking of glass products. RF-excited sealed CO2 laser beam, combined with a head galvanometer and the software offers the fastest, cleanest, reliable method for marking and engraving glass.
A CO2 laser glass can be laser marked with a bar code, in particular 2-D barcodes or data matrix easily with the vision to read data that may be contained in the barcode attached. The use of bar codes on the glass allows you to trace the product all the way to final assembly. This will ensure a continuous uninterrupted supply of goods. Laser marking or laser> Barcode incidentally can also be used for selling the product for the identification and validation. This helps reduce the warranty costs of imitation or unauthorized products are intended.
A CO2 laser marked or laser etched bar code can be read by vision systems in production to verify the identity of the party. Examples of these are the strength of prescription eye-glass lens, or the type used in the lamp in a Honda Civic.This ensures that the part is ordered and successfully used throughout the manufacturing process and that the correct number of parties on the basis of the components of total revenue expected.
Evolution of CO2 laser marking for glass in comparison with traditional methods is very extensive. These include:
• No contact with the part of the scoring method, whereby the possibility of fracture and damage to the part and eliminates the need for maintenanceUnit writing
If you want to buy • No solvents, thinners or detergents, and keep the field, such as ink color system of labeling or printing ink, significantly reducing operational costs and eliminate the need for constant maintenance of these technologies in different colors of ink connected
• Do not get the color of the ink pads because it could fall up to a corner or be turned to the side causing the printed image on the glass do not turn sideways or place
• NoneNeed to maintain the tube in place and ensure a safe stop with a rubber mask is formed as in the case of Airgrit labeling
• Using a CO2 laser marking of glass for industrial applications, the product can be labeled "on the fly [] when you move. When she stopped, or" square "to celebrate the six-eight lines of text more laser logo etched less than 0 5 seconds
• The use of a CO2 laser marking, supplies are not needed and no procedure forCleaning or maintenance
• Using a CO2 laser marking changes at all [texts, different logos, forms, etc] is possible with a simple click and drag the command to be achieved by using the mouse
CO2 laser marking for glass in industrial applications is the fastest and most efficient, cheapest way to characterize the product.
December 19, 2009 at 12:05 am
Engraving with a laser is actually a simple process. A laser is just a tool. Lasers can engrave most materials today. The most popular materials in the engraving fields are coated metals, wood, acrylic, glass, leather, marble, plastics, and describes a variety of synthetic materials made specifically for lasers, although it is sometimes confusing as laser marking, laser etching. Unlike conventional etching, laser etching has simply notMasks or chemicals.
It was discovered in the early 1960s, when scientists discovered that they could create a light source, focus the energy and have a tool powerful enough to affect certain materials. Laser marking is the preferred method when permanency or aesthetics requires the identification will. It did not take very long for the laser engraving industry notice and soon lasers were used for a variety of industrial applications including welding, heat treatment, etching andEngraving.
If you think of a laser as a light source like a lightbulb, you know that a light bulb will emit energy all around him. And the concept of laser etching is basically just another name for laser engraving.
The ability to laser cut complex profiles can eliminate the need for additional measures, so that laser cutting highly economical. Laser cutting offers a superior cutting edge quality with parallel sides and withoutRidges. Laser cutting adds high precision, reduced contamination or warping, and quit a good quality for industrial applications trim.
The laser metal cutting option can be to some of the laser cutting systems are added. A laser works very well for cutting acrylic (Plexiglas), PETG, thin polycarbonates (Mylar), styrene expanded PVC (Sintra), wood, paper and fabric.
You can laser mark in the ranks of some 1 to 10,000. Co2Lasers can provide excellent results for marking glass and a significant reduction in operating costs and supply costs. Laser marking is also preferred if the role to be marked is too small or too complex is a form to something, but characterize laser etching .
Typical industries that the laser marking is the advertising, engineering and medical industries. To check the laser marking is a process in which materialindelibly marked, very high speeds (milliseconds per character). The laser marking of glass by CO2 laser "on the fly or while moving can be a great companion now for many industrial environments and applications for glass marking.
Also you have indeed some of the kiosks in shopping malls and specialty stores for laser engraving services, as it is seen to be the most common type of engraving. Quite a few companies now make laser engraving machines, laser –Marking systems and laser etching equipment.
Laser engraving can be used currently carried out by conventional industrial engravers for most of the jobs. Of the many products that are laser engraved today, iPods and laptops are among the highest in the consumer market. And the laser engraving of metal used to power especially if the metal of the harder Art